PDA

View Full Version : Need Help finding String/Cable length



Scooter_SC
08-16-2006, 12:48 PM
Martin Cougar III Magnum with nitrous cams.

Here's the kicker; They cam module does not have A, B, or C on it. Instead it has HL.

The cam module also has two screws, on opposite sides, to hold it in place.

The bow says it has a 58 1/2 string and 38 inch cable with a let off of HL. However I purchased a 58 1/2 inch string to replace mine and it was way too long. :confused:

Help!

Myk
08-16-2006, 01:23 PM
The cam has A, B or C on it.

Scooter_SC
08-16-2006, 01:35 PM
If it does, I sure can't find it. I've looked all over the cam and can find nothing

Scooter_SC
08-16-2006, 01:50 PM
Here is a picture of the whole bottom cam

Scooter_SC
08-16-2006, 01:51 PM
Bottom module close up.

Scooter_SC
08-16-2006, 01:52 PM
Close-up of top module

Scooter_SC
08-16-2006, 01:53 PM
I've got my camera with me. Let me know if any other angles would help.

Scooter_SC
08-16-2006, 02:12 PM
I got my answer off of AT. It's a B cam. String length 51.5'' and cam 38"

Myk
08-17-2006, 03:59 AM
They must've added it.
Both of mine (which are new cams) have it right there on both cams.