View Full Version : RE: Adjusting the draw weight on Threshold Compound Bow Adventure Series

03-21-2010, 12:29 PM
I recently purchased a Martin Threshold Compound Bow-Adventure Series. I've read the manual on how to adjust the Draw Weight but am having difficulty understanding how to make the adjustment to a lower draw weight. If anyone has advice on making the adjustment I would appreciate the help.

James Ellison

03-21-2010, 01:11 PM
There are two limb bolts.. turn them counter clockwise, one complete turn on each bolt(top & bottom), should lesson the draw weight about 3 lbs.
I'm not sure about this(it should be in your manual), but, I think you can only go a total of five turns to still be safe to shoot your bow. Please check your manual.
Hope this helps..


03-21-2010, 02:05 PM
Thanks. We tried using the allen wrench that came with it and was unable to get it to turn.

03-22-2010, 02:04 AM
Put some oil on the threaded part of the bolts and wait a couple of hours. This may help, if doesn't - go to the dealer.

01-11-2011, 07:48 PM
I have the experience but I will charge :P

01-11-2011, 08:45 PM
I have the experience but I will charge :P

Could you explain that please.?