PDA

View Full Version : Martin P3 mods



Kentaro
04-27-2010, 05:02 PM
Hey everyone I have a 2007 martin P3 elite (furious cams) with a 28inch DL and #60 DW. I was wondering if there is any mods I can make (that will not cause excess stress on the bow) to increase DW or increase arrow speed?

Spiker
04-27-2010, 09:47 PM
Hey everyone I have a 2007 martin P3 elite (furious cams) with a 28inch DL and #60 DW. I was wondering if there is any mods I can make (that will not cause excess stress on the bow) to increase DW or increase arrow speed?

New limbs with higher deflection # to increase DW.
Lighter weight arrows - if your not at IBO already.
Fine tune the bow so its at it's peak performance level.
Take everything off the string but a tied nock point.

If you can give all the details about your set-up, what arrows your using and what the results are, etc. - folks here may be able to give you some tips/suggestions.

Kentaro
04-28-2010, 02:08 PM
Well the let off is set at 65%, the strings are factory, shoot says 50.5, split says 39.25 (could read 34.25), and i am using goldtip expedition hunter 5575 arrows with duravanes.

Kentaro
04-28-2010, 02:13 PM
I forgot to say I have no idea about the current speed but i just had the bow tuned at a shop.