scepter cams

[02shooter]

The 1999-2000 Scepter I have has small cams with the mark 0 on them, will the new Furious and Furious-X cams interchange with them? Looking for more let off any ideas?

02shooter

[scepterman30x]

Yes you can replace them with the furious cams/x cams. But you would be better off replacing them with the NOS A cams/x cams with the HL mods which I have some for sale. PM me if you are interested.

[Coop]

Scepterman,,, What makes the Nos cams better on the Scepter bows? Alot of people love them(NOS).. an I would really like to hear...


Thanks,
Coop

[Montalaar]

It has a somewhat better wall (not comparable to a wall produced by a draw stop), the draw cycle is a tad more agressive and so it produces also more speed.

[scepterman30x]

Scepterman,,, What makes the Nos cams better on the Scepter bows? Alot of people love them(NOS).. an I would really like to hear...


Thanks,
Coop

Along with post #4, the NOS cams are easier to adjust for one thing i.e. tuning and such. The engineereing is top notch, they have bearings and not bushings and one thing I like is the fact they have a wider foot print across the axle for better side to side stability.

I did a post a while back about the benifits of them on AT or this sight. I will see if I can find it and repost it.

[Coop]

By chance would you know if their were NOS cams made for 31.5 to 32 inch draw length? I have a S4 Elite, left hand, '09... & would the string & cable length change?

Coop

[bcriner]

Yes, the small "A" cam was normal size for out to 30", so a "B" cam on the elite will kick it out there those extra couple of inches.