View Full Version : Rytera bullet X
07-05-2010, 09:46 AM
Is it possible to make my 2006 bullet x into a one cam and if so what cams and what specs on sting/cable??
07-05-2010, 10:41 AM
Yes it is. You could use the original MPro-Cam that has always been used on the Bullet-X or try out the actual Rytera-Singlecam.
I am sure that someone here will be able to help you.
07-05-2010, 02:01 PM
Actually thr rytera bullet x used a Vipro cam on the single cam version it is the same as a Mpro cam that the martins used. If you have nitrious 2 cams on your bullet I might be interested in trading the single cam, Idle wheel and strings and cables for your setup..
07-06-2010, 02:51 PM
Yes, you can.
I have both L/H and R/H Vipro cams/idlers, that I will willingly swap 1 for 1, for a set of Nitrous C's or B's.
If you have C cams, the Vipro will drop about 5 Lbs from your max DW. If you have B cams, the Vipro will drop 10 Lbs.
07-07-2010, 01:48 PM
Thanks for the response guys. I already have a trade lined up, but thanks for the info! rcher54
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.