View Full Version : Martin Shadowcat 2010 equipped with CAM 1.5 or CAM 2?
07-13-2010, 11:15 PM
a friend of mine has a Martin Shadowcat 2010.
I was wondering which cams are built in this bow.
There is no label, number or any desctiption printed
on the cams.
How are CAM 1.5 and CAM 2 identified?
07-14-2010, 01:42 AM
The Cams have a small stamp in them stating 1.5 or 2.
Furthermore the two cams have a different design.
When you look at the cable that is connected to the Cam via the helical cam track:
The Cat1.5 Cam has a post after the helical track where the cable is connected to.
The Cat2 Cam has a second post so that the cable goes around the helical track and furthermore around the first peg. This allows the Cam to roll out more cable as is needed with the longer draw length.
07-14-2010, 03:34 AM
thanks for the fast answer,
I will check
07-14-2010, 06:54 PM
Check the modules. A few escaped with Hybrix cams.
07-26-2010, 11:17 AM
get my new shadowcat wednesday, I will check ...
08-01-2010, 06:28 AM
got my new shadowcat last week.
Color of the riser is carbon, same color as limbs.
On the cams it is printed CAT 1.5
08-01-2010, 09:11 PM
What is the ATA and draw length of your new shadowcat?
Carbon look is very :cool:.
08-23-2010, 10:49 PM
ATA is 41,5", everything is in spec.
08-24-2010, 05:59 AM
Draw length is to specs? What string lengths are given on the limbs?
08-24-2010, 02:14 PM
ATA and BH is close to spec.
Did not measure draw length yet.
String length printed on sticker are:
see attached pic
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.