PDA

View Full Version : Limbs and Nitrous cams



NSHunter
08-05-2010, 08:24 PM
Can anyone tell me if Martin makes a limb that is wide enough at the tip to accept the Nitrous cam and at the same time also fit in the 2010 roto limb pockets? I am thinking about putting a Nitrous X system on my Warthog.

Montalaar
08-05-2010, 11:31 PM
No, they don't at this time.

elkslayer4x5
08-06-2010, 07:59 AM
My nitrous cams measure about 3/4" outside to outside and have a 1/16 spacer on both sides. So it depends upon how narrow your limb forks are. :cool:

drevilmike77
08-06-2010, 08:58 AM
I have NOS cams on myn 09 Bengal and they work great.

Montalaar
08-06-2010, 11:03 AM
The '09 limbs had a wider fork but will not fit into the 2010 cup.

drevilmike77
08-10-2010, 03:01 PM
my bad! I did not know.

bfisher
08-10-2010, 05:22 PM
I was going to do this with my FireCat. Found that the cutout in the limb forks is about 1/10" too narrow. Bummer. I was really interested in seeing if there was a performance difference between the Cat2 cams and the Nitrous. Even have a nice set of Winner's Choice string/cables for that NitrousX.

elkslayer4x5
08-11-2010, 06:26 AM
Can anyone tell me if Martin makes a limb that is wide enough at the tip to accept the Nitrous cam and at the same time also fit in the 2010 roto limb pockets? I am thinking about putting a Nitrous X system on my Warthog.

Could you install 2009 limb pockets to accept the 2009 limbs? :)

Destroyer
08-11-2010, 10:07 PM
You would think so. If the 2009 riser accepts the 2010 pockets wouldn't that mean you could go the reverse? :confused:

wisecane
08-12-2010, 05:37 AM
I wonder if I could take the limb/pockets off of one of the Slayers and switch them to my warthog riser....and then put the newer limbs/roto cups on the slayer riser. I would need new strings cables, but could it be done?

scepterman30x
08-12-2010, 05:44 AM
[QUOTE=wisecane;29829]I wonder if I could take the limb/pockets off of one of the Slayers and switch them to my warthog riser....and then put the newer limbs/roto cups on the slayer riser. I would need new strings cables, but could it be done?[/QUOT

Before anyone chimes in WISECANE has the original Hog. Yes you can take the limbs off the Slayer and put it on the HOG but not the limb pockets...your Hog has the original Roto cups with the pins for the original limbs. So basicly you can swap the limbs on each but not the pockets and roto cups.

wisecane
08-12-2010, 07:03 AM
I'm sure if there was any advantage to doing this project, Martin would have already done it :)

scepterman30x
08-12-2010, 09:29 AM
You would think so but maybe not. Sometimes with Martin it is us shooters who give them some ideas of what we want or why didn't you do it this way or that way.

Destroyer
08-13-2010, 03:20 AM
Totally agree mate. :)

NSHunter
08-20-2010, 04:51 PM
Could you install 2009 limb pockets to accept the 2009 limbs? :)
My 09 Warthog has the 2010 limb pockets installed on it so it would be no problem switching back to the 09 limb pockets. I would just need a pair of limb pockets in addition to the limbs. Anyone know where I could get both?
I guess I could sell my 2010 limb pockets and Barnsdale limbs to offset the cost.

elkslayer4x5
08-21-2010, 06:38 AM
Best bet probally would be ArcheryTalk Classifieds. If you don't find them listed, place a wanted to buy ad. Good luck with the conversion. :D