PDA

View Full Version : Martin Pantera String Lenghts



killamoney76
08-23-2010, 08:41 PM
I recently bought an '07 Martin Pantera it has dual nitrous C cams and quad 65% leftoff modules setup for shoot thru, my question is does anybody know the length of the cables and shoot string for this setup? I'm only asking this because when i bought it it didn't have any on it and the sticker on the limb is for ....I'm assuming the M-Pro single cam. any help would be greatly appreciated.

Hutch~n~Son Archery
08-24-2010, 06:44 AM
I checked Martin's site and the only specs are for the M-Pro cam, not the Nitrous C cam.:confused:

killamoney76
08-24-2010, 08:19 AM
yea i checked the site also,that's why i posted here. can anybody figure this out?

Spiker
08-24-2010, 09:24 AM
By my calculations a 54.25" string and 34.75" cables should give you 35"ata.

killamoney76
08-24-2010, 10:35 AM
thanx so much!!! i'll let ya know how it shoots when i get it set up!!

bfisher
08-24-2010, 11:05 AM
Hopefully Flytier17 will know this. He obtained just such a bow from me a couple years ago and if he still has it he should have this info. It would beon the bottom limb sticker as it came as a custom order straight from the factory. Quite a nice bow I might add.

killamoney76
08-24-2010, 12:32 PM
this is a frakeinbow the person i bought it from converted it to the Nitrous X.

killamoney76
08-24-2010, 12:36 PM
the sticker on the bottom limb says 56.5" string and 37.750 cable lengths. thanx for the info i'll have to talk with Flytier17

Spiker
08-24-2010, 12:47 PM
Hopefully Flytier17 will know this. He obtained just such a bow from me a couple years ago and if he still has it he should have this info. It would beon the bottom limb sticker as it came as a custom order straight from the factory. Quite a nice bow I might add.

It would be good if he or scepterman chimed in.
I just calculated lengths to get 35"ata that a '07 Pantera had.

bfisher
08-24-2010, 06:24 PM
the sticker on the bottom limb says 56.5" string and 37.750 cable lengths. thanx for the info i'll have to talk with Flytier17

Those might be the proper lengths. Without looking I would say with certainty that if the sticker were for an MPro equipped cam the string length would be a lot longer. Flytier17 (Alec) should be along soon, I hope.

killamoney76
08-25-2010, 03:44 PM
Flytier!!! what are the correct lengths??? please help!!

bfisher
08-26-2010, 11:16 AM
Flytier!!! what are the correct lengths??? please help!!

Doesn't look like he's around right now. He might be sleeping. He's a college boy so he better be studying if he doesn't answer.