View Full Version : ccs cable containment system
i had my bow apart today and the clip and pin that holds the rollers in seems like theres alot of play there, i am trying to quiet down my z and i think this could be some of the noise im hearing while shooting
08-30-2010, 07:44 PM
On another thread here someone mentioned putting a dab of silicon on an axle E-clip. Don't see any reason why it wouldn't work in your case.
well before i put my bow back together i made a washer out of a sabots for my muzzleloader the only thing i had laying around and installed it under the clip on the ccs and it seems to have taken the twang out of my bow
09-03-2010, 09:21 PM
i made a washer out of a sabots for my muzzleloader
Good stuff rock. :)
09-04-2010, 02:49 PM
I stuck a limbsaver "insulator strip" on the outside of my CCS, seemed to help alot. Shim out any play, then add the strip. That's a good combo. Quiet as a mouse now.
yea there should be some nylon washers in there it helped a lot. ehunter i have to check out those strips
Powered by vBulletin® Version 4.2.2 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.