DeadOnX
09-08-2010, 05:15 PM
Hi,
Just recieved my Alien Nemisis today and prudently checked out the specs and workmanship of the bow as soon as I removed it from the box. I found that she has some cam lean :eek: and that the ATA is a bit more than the advertsed ATA of 34". I measured 34 1/2 ATA:confused:. Before I take even one shot I want to correct the cam lean issue. Would someone explain how I should do this for this bow? I assume it can be done by twisting the cables until the lean is gone but just want to be sure this is the correct process for this bow. It has the Hybrix cam system. Also could someone chime in of how the longer ATA measurement may affect the bows performance if at all. Could this be a sign of another problem?
Thanks
Just recieved my Alien Nemisis today and prudently checked out the specs and workmanship of the bow as soon as I removed it from the box. I found that she has some cam lean :eek: and that the ATA is a bit more than the advertsed ATA of 34". I measured 34 1/2 ATA:confused:. Before I take even one shot I want to correct the cam lean issue. Would someone explain how I should do this for this bow? I assume it can be done by twisting the cables until the lean is gone but just want to be sure this is the correct process for this bow. It has the Hybrix cam system. Also could someone chime in of how the longer ATA measurement may affect the bows performance if at all. Could this be a sign of another problem?
Thanks