PDA

View Full Version : Letoff tweaking



hunt123
09-12-2010, 03:30 PM
Been reading threads on here about letoff and I have a question or two. On my 09 Bengal, can I set the draw stop to create the letoff I like, then twist/untwist the string to fix my draw length (assuming I'm reasonably close with the module)? I guess I could try it, but wanted to see if it's viable or if there are potential problems before going to the effort.

The other day, I wanted to shorten my drawlength a touch by moving the draw stop and found that it nearly eliminated the letoff, which I DID NOT like. I'm an old guy and with that setting, if my muscles unconsciously relaxed just a fraction, WHAP!

Thoughts?

Destroyer
09-12-2010, 05:50 PM
can I set the draw stop to create the letoff I like, then twist/untwist the string to fix my draw length

You could try it but twisting cables will change the letoff again and it might take a lot of messing around, not sure. Personally, I like as much as I can get and I don't like hard walls. I'd rather change modules to get lower if that's what I wanted.