PDA

View Full Version : 1999 martin fury fuzion cam



hayden
10-19-2010, 12:02 AM
hi all, it's my first time posting here. i have just purchased a 1999 martin fury with fuzion cam and the module on the cam is an f6. i'm a 28,5 inch draw length and was wondering if anyone knew which module was the correct one for my draw length. all advice is appreciated.

Money Man
10-19-2010, 04:26 AM
Found this link at archerytalk.com
http://www.archerytalk.com/vb/showthread.php?t=1255405&page=1
Hope it helps, good luck

Hutch~n~Son Archery
10-19-2010, 05:39 AM
hi all, it's my first time posting here. i have just purchased a 1999 martin fury with fuzion cam and the module on the cam is an f6. i'm a 28,5 inch draw length and was wondering if anyone knew which module was the correct one for my draw length. all advice is appreciated.

I can't seem to find the module chart for your bow, but I would say it's probably an f4 module, but that's only a guess. You probably could test the f4 module and if that one doesn't feel right, then try the f3 or the f5 module.

Spiker
10-19-2010, 06:41 AM
Each module is 1" difference so if the F6 is an inch too long for you just drop down one size etc.
I would just buy a full mod set and be able to use the one that fits me.

Hutch~n~Son Archery
10-19-2010, 07:40 AM
Each module is 1" difference so if the F6 is an inch too long for you just drop down one size etc.
I would just buy a full mod set and be able to use the one that fits me.

+1:cool: Definitely a good idea.

hayden
10-20-2010, 02:09 AM
thanks for all the help. i think i will buy a module pak and work from there. your help is much appreciated.

dragonsfire311
10-20-2010, 06:56 PM
my prowler has fusion cam and I believe I have an F-1 for 26" d/l. might what to work up from there.