PDA

View Full Version : center shot measurement



FireHawk Owner
10-21-2010, 05:37 PM
Does anyone have a good or rough measurement for the center shot on a 2010 FireHawk or a Firecat. I am out of town right now and have under spined arrows with me. I can't eye ball down the cam , do to cat whisker in my way. Just swooped form 2009 to 2010 Limbs. Cams are not in the same place as before. So were it was is no go anymore.

FireHawk Owner
10-21-2010, 05:43 PM
If not I can work with the under spine arrows, I have tomorrow. Just don't have any room for era.

Ehunter
10-21-2010, 05:48 PM
My Firecat has the 2011 limbs. It tuned perfectly with the center being just under 3/4 inch from the metal of the window. Not sure if that'll help you, but I hope it does.

FireHawk Owner
10-21-2010, 06:06 PM
Thank you Ehunter.:) what metal though.LOL

bfisher
10-22-2010, 05:11 AM
OK, I have my limbs and such all swapped out to 2010 models. Just measured my "Cat" and centershot measured from the rubber pad on the sight window is just about 13/16". This might be a good place to start, but bear in mind that each setu can vary a little due to arrow spine, bow hand torque and other little issues.

Brem
10-22-2010, 06:09 AM
Barry,
I can attest to this. I have been trying to find the "sweet spot" with my .340 spined arrows and it can be a bit frustrating. On my AX 7/8" from the riser is perfect with these.

FireHawk Owner
10-22-2010, 06:23 AM
Thanks 13/16 seems to be it. Even with my under spine arrows. Thank you.