View Full Version : draw stop for cheetah
10-28-2010, 07:21 AM
I have been wanting to adjust my draw stop. Where is it located and how does it work. I thought you could put in like a 29 inch mod and adjust to like 28 1/2 also wouldn't this mess with the let off? And how does it all work?
10-28-2010, 01:55 PM
The draw stop is located in a slot in the lower cam. Setting the module to a certain measurement and setting the draw stop short does not "mess up" the letoff. It does reduce it, though, depending on how short you set it. Although a cheap way of reducing letoff it also reduces any valley the cam may have, however some guys still do this to achieve less letoff. They find that the bows hold steadier when aiming because there is more work done by the back muscles and less by the arm and shoulders.
10-28-2010, 03:53 PM
dang Barry:o u summed that up in a nut shell :o
10-28-2010, 06:47 PM
Thank ye, thank ye!!!!!!!!!!!!!
10-29-2010, 02:16 PM
If the bow is a 2007, you'll have to look real hard to find that draw stop. The original MPro cams (and I think all of the Rytera Vipro cams) didn't have them. If your cam looks like the one in the photo attached, you don't have a draw stop.
Powered by vBulletin® Version 4.2.2 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.