PDA

View Full Version : Martin limb adjustments



Hutch~n~Son Archery
01-06-2011, 04:33 PM
Nothing new for most. But for those who are new or getting acquainted. This is a subject that just came up recently and unfortunately it goes over my head, I assume people already know. It also comes up on here frequently.

With a martin bow you do not need a bow press.

Just back out the limb bolts equally. a couple of turns one side than the other till the bow is collapsed.

Also another subject right from the manual

Changing Draw Weight

Martin bows have a fifteen pound draw weight range. Using a 3/16 allen wrench ; you will
turn the limb bolts clockwise to add weight and turn counter clockwise to reduce weight. One
complete turn on each limb bolt provides about 3 pounds of adjustment.
TIP: Mark a line on each limb bolt in white-out or white paint marker to make it easier to
keep track of how far you are turning each bolt.
Note: Do not shoot your bow with the limb bolts more than 5 turns out from the
riser.

Just a little help for you do it your self guys.

Hutch