roller guard problem

[kennyf]

i am new to this forum and wanted to ask a question
i have a 2010 firect tr1 and when i draw my bow it seems like there is something catching in the roller guard i took it to the shop and they dis assembled it and checked it over and re assembled it putting some lube inside it. it got a little better but then started again. there is a noticable noise also. i plan on going back to the shop when i get a chance. just wondering if anyone had any suggestions?

[archerx7]

Could be a bad bearing in one of the rollers. Also make sure there is a small spacer between the 2 rollers so they don't touch.

[kennyf]

i think that might be theproblem when i draw it the roller on the right is the one that makes the noise i think its rubbing on the other roller. im going to go to the shop tomarrow and see what they say. thanks for the input

[kennyf]

had the guy at the shop look at it again he put alittle spacer in there problem solved!

[polaris754]

I am guessin u should have got that spacer when u bought the bow or is it a extra >?:rolleyes:

[archerx7]

There is supposed to be a thin spacer between them, either that one got past QC without it or someone else had it apart and didn't put it back in.