View Full Version : scepter4

03-02-2011, 01:23 AM
I have just bought a new( last years model ) septer4 mag with small furious cams and the module has a L stamped on it ( Large I think )string lengths are to spec 50.5 string and 39.25 cable and the max draw length is 26" on setting no 4 on the mods.It should go to 28" I want 27". that is why I bought this setup .ata is a1/ 4" long brace hight is 6 3/4"::confused:

03-02-2011, 06:03 AM
Try different number holes in modules you should have six diferent numbered holes one of them will give you the correct draw lenght take out both screws to get different settings each hole should move you by half an inch.

03-02-2011, 08:23 PM
done that! Its maxed out at 26"

03-02-2011, 08:38 PM
Hm, weird.

Even witht he medium Module the max draw should be around 27". Check ATA and BH for specs, check Cam timing and if on both cams is the same module.. :)

03-03-2011, 12:44 AM
yes i thuoght the same and ATA is 1/8" long --brace hight is 6 3/4 ---cam timing is spot on ----and screws are both in no 4 hole this why i am asking for help?:confused:

03-03-2011, 02:51 AM
are you changing the screws on both cams i think you have one of the screws in the wrong place and the module is not rotating correctly

03-03-2011, 02:57 AM
PM Sonny Thomas and he will walk you thru it

03-09-2011, 11:24 AM
I wonder if you got any help?