PDA

View Full Version : max letoff



gravedigger
03-09-2011, 06:15 PM
so how do i get max let off.im not sure how it works.my dl is 28.5 and it fells like im not at that 80% letoff at full draw,it feels like im getting a little creep.i have the f-4 mod in and the f-5 feels worse.i could be just overthinking it.im not sure

bfisher
03-10-2011, 05:34 AM
so how do i get max let off.im not sure how it works.my dl is 28.5 and it fells like im not at that 80% letoff at full draw,it feels like im getting a little creep.i have the f-4 mod in and the f-5 feels worse.i could be just overthinking it.im not sure

You probably need to reposition the draw stop. It might be stopping you just short of the cams full letoff position. I'm not real good at explaining things, but you need to move the draw stop toward the "+" end of the slot in small increments, like maybe 1/8". It doesn't take much. If you go too far you feel it as the back wall will get spongy.

Now, in doing so if the draw length gets too long you'll likely have to put in the next smaller module and start over. Or you could move the string to the shorter peg in the cam and start again with the draw stop. Be advised that changing to the second peg on the cam will call for relocating the nocking point, and whatever else you have on the string so measure them before you start.

HawgEnvy
03-10-2011, 06:20 AM
looked like a good explanation to me. What you talking about?

gravedigger
03-10-2011, 07:07 AM
sounds good.i will try messing with the draw stop again.thanke you.and who knows it could be perfect but since i got the new string on it just does not feel the same.maybe a couple hundred more shots would help.i have only put maybe 90 through it.