PDA

View Full Version : Nemisis 1.5 cam limb deflections!



Elk4me
05-22-2011, 08:38 AM
Some of you dont know me and some do. I use to be a mod on here before. I went to another bow brand for a few yrs. I am back now and gona get a Nemisis off AT with 50# limbs. I want ot get a set of 45-60# limbs and would like to know the limb deflection #'s so I can keep a eye out for a set!:cool:

bfisher
05-22-2011, 03:56 PM
Matt,

I just sent a set of 50# limbs back to Joel for my Nemisis and I believe they were 3MP so Probably you'd need 5MP limbs to get that extra 10#. I just couldn't part with my Barnesdale limbs.
Barry

alex
05-22-2011, 11:48 PM
Welcome back, Elk4me! :)

archerx7
05-23-2011, 01:17 AM
The 1.5 cams will make appox. 10#'s more than the 2.0 cams given the same limb deflection. In the Barnesdales you would probably need a 155 and the Martin Powertuff would probably be a 3MP. Might want to call Joel and verify those numbers though.

Spiker
05-23-2011, 03:59 AM
. 50# 60# 70#
ax 2.0 155 135 115
ax 1.5 175 155 135
az 2.0 175 155 135
az 1.5 195 175 155
nem 2.0 155 135 115
nem 1.5 175 155 135

40# ax,nem 175
40# az 195

bfisher
05-23-2011, 05:51 AM
. 50# 60# 70#
ax 2.0 155 135 115
ax 1.5 175 155 135
az 2.0 175 155 135
az 1.5 195 175 155
nem 2.0 155 135 115
nem 1.5 175 155 135

40# ax,nem 175
40# az 195

Spiker, those are old numbers and probably correct with the Barnesdale limbs. Unfortunately Martin isn't using those limbs any more. They are now using Martin limbs. However, the limb deflections you list for the AZ and Nemisis at 50# are exactly what are on my bow. When I ordered limbs in the camo of my original order on the Nemisis they apparently didn't have Barnesdales any more so they sent me 3MP limbs/50# for the Nemisis, which I promptly sent back.

I had also talked to Dave Barnesdale about the limb numbers and he said that Martin was putting the numbers on them as at the time he didn't have a machine that could measure the actual deflection on 13" limbs. 14" was the shortest he could measure at the time. He's getting another machine built to do so. He also verified that Martin had discontinued ordering limbs from him. This was about 2 months ago.

Spiker
05-23-2011, 08:36 AM
Spiker, those are old numbers and probably correct with the Barnesdale limbs. Unfortunately Martin isn't using those limbs any more. They are now using Martin limbs. However, the limb deflections you list for the AZ and Nemisis at 50# are exactly what are on my bow. When I ordered limbs in the camo of my original order on the Nemisis they apparently didn't have Barnesdales any more so they sent me 3MP limbs/50# for the Nemisis, which I promptly sent back.

I had also talked to Dave Barnesdale about the limb numbers and he said that Martin was putting the numbers on them as at the time he didn't have a machine that could measure the actual deflection on 13" limbs. 14" was the shortest he could measure at the time. He's getting another machine built to do so. He also verified that Martin had discontinued ordering limbs from him. This was about 2 months ago.

Yeah - I think I got one of the last sets of Barnsdales that Martin had (155's) to put on one of my AX's. It was a 70#er that I dropped to 50#.

I thought Matt may have found the chart helpfull. He said he is getting a Nemesis off AT so he may be able to find/swap for a set of Barnsdales in the deflection he needs.

I have a set of 115 Barnsdales in black carbon hanging on the wall. =)

I've been going to sit down and type out the Barnsdale to Martin limb chart for the Rytera's but havent gotten around to it yet.