Martin Impalla

[cstevens]

My wife was given an Impalla in the hopes we coild get her interested in archery. The bow hasnt been shot in at least 2 years. I am trying to get some info on the bow. It appears to be in almost new condition. The spec tag on the limb does not have any marks on it. It seems to be set at about 45lbs right now, has a 27" draw and is a deep red color. Can anyone tell me anything about the bow, its value, is the draw length adjustable? Is the bow worth getting it restrung and new cables?
Thanks for your time
Chuck

[Lifer]

The Impala was built about 10 years ago and was offered with several cam/wheel options that all offered modular draw length adjustability. Please check the module located on the back-side of each cam/wheel. It should be marked with a number followed by an X. These X modules are still available, and come in sizes 2X thru 9X. Each module size offers 1" greater draw length.
The Impala was among Martin's first models to be equipped with a machined aluminum riser and is a great choice for your novice-to-be wife to learn with. It was originally valued at around $400 but today's price is difficult to determine. I would, however, certainly think it is worthy of a new set of strings and cables.
Hope that all helps.

[PUG]

Yje Imapalla was manufactured in the early to mid 90's. It is draw length adjustable, via a removable module in the cams. Its 2 screws to remove the mod, and replace with the desirec length, but must be done to both cams....

Wether or not it is worth having new strings and cables installed is entirely up to you. If they show enough use to justify replacing, than by all means do so before the bow is seriously shot. If not, than don't. If it is a steel cable system, and there is any bare metal showing, you WILL need to have them replaced before the bow is used.

And value...this is always a tough one...Value is completely in the eye of the beholder when it comes to bows. I would venture to guess, depending on the condition, that $100-$125 is an appropriate value. Hope this helps!

PUG

[cstevens]

Thanks for your time and help
Chuck