Printable View
Curious to see if any other Bengal owners are having issues with the lower (cam side) limb bolt backing out? I marked the bolt and after about 20 shots it backs out about an 1/8 turn. I even put a nylon bolt in the side to lock it and it still moves. Anybody else having this problem?
Can't say I have noticed it with mine, but I'll keep an eye on it.
I didnt notice till I went to set my weight higher and it looked a little off from where I usually set it so I marked it and sure enough it was moving
Tis has been discussed before with other bows. Instead of th nylon setscrew in the side of the barrel nut you can get steel ones with a brass tip. This is what I use. Another thing you might try is giving the limb bolt that extra 1/8 turn and then let it back itslf out that little bit as you shoot. This might work if it only backs out that little bit and settles. 1/8 turn isn't very much when figuring draw weight and tune.
So far I've only had one bow do this and that was a 2006 P3. Not being a parallel limbed bow there was more vibration.