Bow Maintenance!!!!!!
Do you do it?
How often?
What do you do?
Hutch:cool:
Printable View
Bow Maintenance!!!!!!
Do you do it?
How often?
What do you do?
Hutch:cool:
OFCOURSE!!! every year i take my cams off my bow and grease them make sure everythings still in working condition, and ofcourse regular string waxing and before i shoot my bow at a 3d shoot or go hunting i check my limbs for hairline cracks and do a complete equipment look over especially my arrows. You can never be to careful when it comes to anything that is potentially dangerous.
well not grease but oil with oil for a paintball gunQuote:
Originally Posted by WildWilt15
I use white lithium grease in a spray can, but I havent keep a bow more than a year in the last 6 years but I'm really loving my firecat mite start a new trendQuote:
Originally Posted by WildWilt15
If it's the Planet Eclipse oil it's sewing machine oil and will not stay where it's put. Dow 55 or Dow 33 are super o-ring greases but I'm not sure about the lubricity on hard parts. Tri-Flow Grease is great stuff if you can find it. Tri-Flow oil is fairly common.Quote:
Originally Posted by WildWilt15
I used to have a bicycle business and all we used it Tri-flow and I still buy it through the bicycle places. It is the best thing I have found for sealed bearings.Quote:
Originally Posted by dugout
Hutch:cool:
i know its not the planet eclipse its from a tippmann im not for sure what kind but it seems to work very well on my cheetah over the past 3 years.Quote:
Originally Posted by dugout
Bow Maintenance the first thing I asked is, do you do it? Reason I asked is so many don't and wait till the last moment and the results are not good. The next question is how often? Some think service a bow once a year is enough. Well if you are a heavy shooter you need to check the bow regularly. Many times I have checked the bow over and glad I did. Limb splinters is the number one thing I have found. The last question I asked is What do you do for maintenance? I think WildWilt15 answered it pretty well. The one thing that needs the most maintenance is the string set. Too many things can go wrong with it. A well maintained bow preforms well.
Hutch:cool:
I wax my strings every once in awhile,wipe bow off if it gets rained on.....checks specs if shots are off,new string ans cable every so often.Bout it.
I typically have tinker-itis. I like to know how the bow operates inside and out so I am able to take care of whatever I need to in the event something goes wrong. I regularly look over my strings before/after shooting. Keep an eye on the serverings to see if there is any wear and how bad it might be. Give the strings a good waxing every other shooting session. I keep an eye on all of my hardware to make sure it is all snugged up. When I need to use any lube, I use White Lithium grease. I haven't had to do much for my 2 newer bows, but I did break the Cheetah down and grease up the Limb Pockets / Bolts at the end of the season. I haven't dove into getting cams off yet, but I'm sure when the time comes it's something I'll figure out.Quote:
Originally Posted by Hutch~n~Son Archery
Whenever I adjust anything, I always measure out ATA and BH just to make sure everything is inline as well there.