Will 4 vanes work with a blade spring rest?

Test group shooting at 20 yards.

Four 4 inch AAE vanes at 20 yards.

http://i285.photobucket.com/albums/l...rsttest203.jpg
http://i285.photobucket.com/albums/l...rsttest201.jpg

Four 3 inch fusions. Some tore off already.

http://i285.photobucket.com/albums/l...inchfusion.jpg

Quote:

---

Originally Posted by Double S

Test group shooting at 20 yards.

Four 4 inch AAE vanes at 20 yards.

http://i285.photobucket.com/albums/l...rsttest203.jpg
http://i285.photobucket.com/albums/l...rsttest201.jpg

Four 3 inch fusions. Some tore off already.

http://i285.photobucket.com/albums/l...inchfusion.jpg

---

Lol, too much plastic for an arrow to get through!

I try not to group shoot too but it was too tempting while trying out 4 vanes. ;) I gave into temptation.

Quote:

---

Originally Posted by elkslayer4x5

Lol, too much plastic for an arrow to get through!

---

Quote:

---

Originally Posted by elkslayer4x5

Naw, thats one of the results of the increased surface area of the additional vane, more wind drag, faster stabilazition, and more noise. As an experiment I once made a 6 fletch with 6 5" shield cut feathers, and as expected, it would only fly about 50 yds ( unless you aimed it sky high ) and then come to a stop. Very noisy.

---

So, im nt alone wif the noise. Cheers

Quote:

---

Originally Posted by Hutch~n~Son Archery

DS, wouldn't 3 vanes with a heavier helical work better? and give your the best of both worlds.


Hutch:cool:

---

Sometimes the hand n backside just itchy. Grab arrows, striper n start fletching to kill weekend time. Hahaha

So with all this testing... do they work? sure look like they do...lol
hows the flight noise. or are you just target shooting with um

Quote:

---

Originally Posted by ElkSlayer

So with all this testing... do they work? sure look like they do...lol
hows the flight noise. or are you just target shooting with um

---

I'm enjoying the four 4inch AAE vanes. They weren't noisy for me. I didn't like the fusion vane setup. I'm gonna check IBO regs on vanes. I forgot to check if there's a vane rule.

Ah checking regs ,must be gearin up for a shoot.. dont see where it will matter how many you put on 6 if you like thou i could be wrong let me know what you find out

Common sense tells me that there should'nt be any regulation against 4 fletch, but then what does common sense have to do with rules and regulations. :D

Don't know how they'd work with the 90 degree spacing. I have a Bitz jig and if I were going to go with 4 fletch I'd do 75x105 spacing and use a low profile vane. But being a feather guy I won't put that much weight on the tail end of an arrow. I'd use feathers. Now that you have them fletched try checking the FOC.