I'm going to get a protable bow press for maintenence work on my bow, which one would you guys recommend the bowmaster or the ram rachet loc. pros and cons of each welcome.
Printable View
I'm going to get a protable bow press for maintenence work on my bow, which one would you guys recommend the bowmaster or the ram rachet loc. pros and cons of each welcome.
i ordered a bowmaster just a few days ago, i believe its quite a good press: works with split limbs and solid limbs alike, no adapters required (i think).
Never heard of the Ram Rachet Loc, but then after I bought my BowMaster, I stopped looking at portable presses. Mine is small and compact enough that its always in my backpack. Actually had a situtation where having my BowMaster in my pack would have saved a hunt, had it been in my pack. Now it always is. :)
I snagged a BowMaster with the Limb Adapters. I just run it with a socket/ratchet to cinch it down faster than turning it by hand. Has saved me a lot of time when I've needed to make a few small adjustments here and there.
Was looking at the bowmaster as well. Do you use those limb adapters with solid limb bows too? I would think it better to press from limb tips no matter what design (split or solid).
The split limb adapters can be used on solid limbs as well with no problems.
I've been using a Bowmaster as an 'in the field' adjustment tool for years, works great.
Kev
Used the bowmaster to set up my nephews Threshold. Worth the $.
Yes, I use the new style of split adapters for mine.Quote:
Originally Posted by weldorj81
i think its definitely better to use the adapter at all time, i was able to press my split limb hoyt with a bowmaster without any adapter though. -> its possible to press a split limb bow without adapter enough to make small adjustments on the string (peepsight instal.), however i guess you can not do any serious work on the cams without adapters...Quote:
Do you use those limb adapters with solid limb bows too? I would think it better to press from limb tips no matter what design (split or solid).
correct me if im wrong!!
btw: what do you do with past parallel limbs??
Good question as I've never used mine on such a bow. Most likely, for safety sake and to prevent bow damage I would seek a more sophisticated press. And what you are saying is correct about using it on parallel, split limbed bows. You may not need the adaptors on some if not most. However, I kind of like using the adaptors all the time just to have more clearance between them and the cables/string.Quote:
Originally Posted by Lukeiio
The one thing I've always liked about the Bowmaster is that it packs into such a small package for field use. As a constant tinkerer I end up doing a most work on my bows and others right off the tailgate of my pickup truck at the archery club. What I've spent on the Bowmaster has more been than offset by the gas savings running to Kinseys all the time. But to be honest, I've never in 40 years, had my bows worked on by a shop.