which one have more low profile

Quote:

---

Originally Posted by Tosi

I've used both Blazers and Fusion (Neon's). Like Ehunter said just rotate vanes slightly to the right for cable clearance. I've had some clearance issues and one of the fixes with the rotating vanes was to replace the stock slide with a Saunders Hyper glide which brings the Cables in closer to the cable bar. I use the Fusion Neon's vs. blazer currently with AAE glue and have had few issues. You need to insure that you clean the vane with 70% or better alcohol and prep the shaft. How I prep shaft is to insure that the old vane and glue is removed by scraping off with a razor blade or vane removing tool. I slightly sand and use alcohol and let dry. I like the Fusion as I can see the fletching really well compared to other that I have used. They are stiffer also.

Attachment 7654

---

is it 2" or 3" fusion in thi spic look like 2 inch, and it does look like AAE v max shape like fusion

Quote:

---

Originally Posted by joshclark

is it 2" or 3" fusion in thi spic look like 2 inch, and it does look like AAE v max shape like fusion

---

Norway Fusion 2.1" I think there cut a hair lower then the Blazers, not much. They shoot great with my heavy arrow set up.

Yup, w a drop rest, turn the cock vane out. No clearance issues. You only have to run w cock vane down w a prong rest that some old folks use...

here the lowest profile vane
http://www.bohning.com/store/bohning...hield-cut.html

Quote:

---

Originally Posted by HawgEnvy

Yup, w a drop rest, turn the cock vane out. No clearance issues. You only have to run w cock vane down w a prong rest that some old folks use...

---

Hey now, I resemble that comment! LOL