Noted......will use bowstring wax or aluminum anti-sieze. Put the cams and string back on last night so I'm ready to accessorize. This bow draws so smooth.......pretty impressive.
Things that have worked for me:
- If the screws have locktite, put a soldering iron on the screws and let them heat the screw to break-down the locktite.
- Take the cam off the bow and put it in the oven at 300 degrees, while wearing gloves, try to remove the screws. This has worked a few times for me. The aluminum expands more, and faster than the steel screw. You would want to remove the bearings first, and your mods would need to be aluminum, not plastic.
hair dryer or heat gun works