modified scepter OR unmodified mystic ???
take the following 2 bows and adjust for draw length of 26.5":
martin scepter using small cam and small mod to change draw length range to
anywhere from 25" to 28"
martin mystic using default fuious cam. it will be set up to a 26.5" draw length (no modifications other than using factory installed furious cams)
seeing that the scepter default draw length is from 27" to 32", will there
be a performance hit between the modified scepter and unmodified mystic ?
i post this question because the bow shop i am dealing with has recommended the modification to the scepter. they also sell the mystic but my preference is with the scepter. what would change my mind to the mystic is IF the scepter modification drastically changes the performance of the scepter bow.
thanx in advance...
will obtain more info from the shop & repost more details ...
up till my late teens, i used a recurve bow, and was a finger shooter.
now, in my early 50s, i want to get back into it but i see there is quite
a change from 30 years ago equipment wise.
i approached the bow shop and it was these bows they recommended since i wanted something in a compound bow but used to be a recurve bow, finger shooter. this compound bow will be my first and only modern bow; i do not want to end up with several bows.
i will ask them for the cams that they want to install on the scepter to decrease the draw length to my 26.5" length. the mystic needs no changes to its cams. if the final verdict (after gathering all the proper info from the bow shop) is that the cam mods on the scepter adversely affects its performance, then i will go with the mystic. its draw range contains my length without the need to replace the cams.
i will get the cam info from the shop and add another reply to this thread.
here are some links to both bows;