Search:

I lost the rubber draw stop cover on all 3 of my Aliens very soon after getting them:(
However, problem solved when I used rubber heatshrink to cover the stops.
Added advantage of being able to...

I had similar to this on one of my AlienX bows, it had had a lot of shooting over a 2 1/2 year period though.
Mine cracked in the bottom of the cable groove.
Martin replaced them no problem, since...

The split limb adapters can be used on solid limbs as well with no problems.
I've been using a Bowmaster as an 'in the field' adjustment tool for years, works great.

Kev

Correct cam timing plays a major part in noise reduction.
They have to be in total sync, then the noise disappears.
You need a mark 1/2'' from the round end of each draw mod, make sure the cables...

The mods on my 2010 bow were more rounded than the mods on either of my 2009 bows.
They were redesigned after the early bows gave a few problems with serving wear as you already found out.
However,...

If you really want the 2009 version (nice picture of Laura on the front ;)), pm me with an email address and I send you a pdf copy.

Kev

Just for info, if the peep won't stay straight without the tube, it is not the peep that causes rotation
Be prepared to have to fit new strings and cables if the peep won't stay lined up once...

It's a little bit trial and error.
If you have access to a draw board it is much easier as you can adjust the stop, then draw it back to see where the cam rotation is when the stop hits the limb....

Got onto the main page, but it is as slow as heck.
Definately something up.

Kev

I had a small mod problem on my 3D AX (just like droppixel).
Contacted Joel, and I just got replacement mods in the post.

Big BIG thankyou:D

Kev

Using a handheld mobile phone whilst driving was made illegal over here several years ago, can be a £1200 fine.
I still see many people using them, morons!!!

Kev

I do not do vanes, (nasty plastic psuedo feathers).
3'' parabolic feathers for 3D, 4'' parabolic for hunting.
I don't weather treat them, and still get good performance unless the rain is extreme....

We can gun hunt, but firearms laws are very restrictive as is ground access.
No public land here, if you cannot afford to belong to a hunt club or pay private land rent, you don't hunt.
It is so...

No problem with AX speeds here;
60lb/29'', 335gr @ 303fps for 3D
56lb/29'', 335gr @ 285fps for 3D
63lb/29'', 440gr @ 275fps for hunting

:D

Kev

Ouch! what a bummer.
Hopefully Martin will turn it around quick so you won't be without it for too long.

I gotta admit, I never use the scales on mine except in the draw press, with a safety cord...

My buddy ordered one a couple of weeks ago.
Nice to hear they are good, he'll be pleased about that:D

Kev

Cool, thanks :D

Kev

From personal experience, and from what I've heard, it's a common Rytera bow problem LoL

Kev

Yaay, our own section.:D
Cool:cool:

Thanks Guy's.

Kev

ATA is listed as the same, as is the rest of the specs.
Don't see any difference myself other than the name change.

Kev

Half of my bows are now fitted with the Limbdriver Pro rest.
It is probably the only type of dropaway rest I will purchase in the future.
I like the fact that speed of the bow is not an issue as...

I get my stringmaker to do me a limbdriver 'string' when he makes the new set for the bows, that way it matches.:cool:
I use regular cap headed screws with rubber washers on the arm and they work a...

String Snot is great, softer than most and works right in there.
Also seems to keep the colors bright.

Kev

My black AX has a factory powdercoated riser and the same three piece construction as your Cat, so it is not an insurmountable problem.

As your riser is already anodized, you may not need the...

I've never used one, but apparently you can convert from trigger operation to back tension by just turning a screw.

http://www.bowhunting.net/NewProducts/2004/04-Carter-Solution.html

gives a...