Search:

how long of a wait for the new alien,been waiting about 10 weeks?

just my opinion but I believe split limbs work better with a static yoke.

I guess I'll be sticking with the Scepter V.

can you order the new alien with solid limbs ?

when you do get them out go right to home depot and replace them with stainless phillips heads.way easier to work with.the size of the allen key is a joke,a couple of pounds of torque strips them out.

I couldn't find the limb deflections in the 2012 chart. I think the ones that came off the scepter were 1H,that gave 60lbs.they sent 3m's to replace them.this is with the 1.5 cams. just hoping to get...

what will 3mp limbs give me for pounds on a scepter V?

I shoot 30" draw but I set the cams at 29 1/2".then set the stops back further and let it roll over to 30".this gives you a huge valley,but it will give you a hump in the draw when you drop into the...

blue loc tite

I have 2 scepters that shoot lights out so I don't mind the finish. I view the bow as a tool,not a jewel!!!

I have a shadowcat and two scepter Vs. one is the same speed as my cat and one is a little slower.all three are set up with limbdrivers and the same arrow. two of my buddies have scepters and their...

I still have room on the draw stop,but the cables will be into the cable stops on the cam to hard.

thats something I didn't think of ! I guess I'll just live with the short valley.I'm at the extreme limit on draw length with the 1.5 cam so I can't get the dump into the valley that I like.I know...

Do you know what the draw range would be with the nitro 2.0 cams on the scepter V ???

thank you,that's kind of what I thought.

is there a long draw mod for the new scepter that can get you to 31", or do I need a different cam ?

I switch mine out with stainless phillips heads from home depot.way easier to work with,and they go in or out way easier than playing with a tiny allen wrench.

I've had the same problem with the email.they should just shut down the email,all it does is piss people off.if they didn't have the email you would have to call and they do return the phone calls.

sounds like you lost the valley.

I know how IBO works,that's why I'm saying this will never even make the low end of listed speeds.

1lb of draw weight is not going to get this anywhere near the advertised speed.the string and cables and ata and brace height are spot on.and so is the cam rotation.

mine are 60lb limbs 1Hp,mine max out below 59lbs.

the bow came right from Martin spot on with the ata and brace height. I did pull the string and a cable and measured them on my string jig and they were good.this bow is a shooter for sure,it just...

those limbs are a new set,the ones on the bow are 1HP limbs and all I can get is 58.5 lbs with the measurements in spec. the 1mp are a spare set for my shadowcat and they will get the 60lbs on that...

it looks like the limb deflections are different between the scepters and the shadowcats what poundage would 1mp-331 limbs give me on a scepter?