Search:

Hutch,

Measured ATA and brace height and you are correct. ATA listed at 32.25" actual 33". Brace height listed 7" actual 6.5". Guess I have some work to do. Thanks Hutch!

I have a 2010 Firecat TR2 that when bottomed out is only getting 53lbs. It has 2H limbs on it , so my question is this is suppose to be max at 60lbs so are these the correct limbs for 60lbs?

You are correct!!

What do you mean something is not right? Explain!!

If your son is 29+ you will have to go to the long draw mod which is 29.5" to 31". If 29" the #7 hole will do!

This is the difference in the 08 and 2010 Firecat Cat Cams. The DL on the 08 and 2010 Firecat is the same with standard mods. You have to get the other mods to get a longer DL.

Sonny, sorry I haven't got back sooner with answers to your questions.

1. The timing looks good
2. Using a QAD dropaway
3. Center shoot is good, shooting bullet holes through paper
4. Scale...

Not what I wanted to hear, but thanks guys!

I have a 2010 Firecat TR2, DW 57# DL 28" shooting a 380 grn arrow and I am only getting 252fps. Any of the guru's on here have an idea as to why it is so low. If my calculations are right I should be...

I just looked at mine and the cables cross below the cable slide and that is from the factory.

Thanks Sonny I will give it a try and see what I can get!

Neilmac,

I really only have to get it down to 27.5". My real concern is that Martin advertises this bow as 27" - 30" DL and you have to build custom string and twist and untwist cables and strings...

Here is a little more info. I removed the draw stop and the mods are in the #1 hole which should make it 27". I draw bow back and am getting 27" to the front of the berger hole which when I add the 1...

Do you have any idea what the cable and string length's should be if one was to build a set of cables and string to get the true DL?

These are the current lengths on the website. So where is the change? The cable length is still wrong if you want to get the DL down to 27".

So what are the correct string and cable length's according to NOV RUT?

I guess no one wants to reply to my post. I guess it is because anyone with a Shadowcat knows that I am correct.

Bow is Sold!

If you go by the chart and are trying to get down to 27" DL then the chart is incorrect. You have to add about 1/8" to the cables to get it close to the correct DL. My Shadowcat as it came from the...

Sold pending payment!

08 Martin Slayer W/Nitrous B cams

I have a 08 Slayer with 06 limbs and Nitrous B cams. Riser is silver with black limbs. DW is 75# with limbs on bow and I have a brand new set of limbs that are...

I don't need 27", all I need is 27.5" so I need to bring the DL down about 1/4".

I recently purchased a 2010 Shadowcat and as others have said the draw length is long. I have it in the #1 hole for 27" and all I can get it down to is 27.75". I have been told that to solve the...

Sighted the Shadowcat in today and it is a tackdriver. Sweet bow, I had to replace 5 pin nock bushings just sighting it in. Shooting 27.5" DL, 54#DW with 340 grain X Cutters getting 262fps. I will...

Sighted the Shadowcat in today and it is a tackdriver. Sweet bow, I had to replace 5 pin nock bushings just sighting it in. Shooting 27.5" DL, 54#DW with 340 grain X Cutters getting 262fps.