Search:

I recently converted my 2010 AX to a cable rod/slide. I read that in order to regain peak draw weight the cables need to be 1/2 inch shorter than factory specs. So, I ordered a set of new...

I may have found the root of the cam lean issue. I stripped the bow down and noticed that the pin used to align the top rotocup was sticking out too far and rubbing on the groove. It looks like this...

I'm 99% sure it has the newer style flange bearings. There are no plastic washers, and the far outside of the bearing is a silver metal. (reading other posts described the 2010 bearings like this)

So I am wondering if it is normal to have lateral movement in the cams on a 2010 alien x. I have had some cam lean for a while now and recently decided to swap the top and bottom limbs (css is...

So use the string lengths as a starting point, then make adjustments to bring the BH and ATA within 1/8th of the specs? Now I need a scale to test the final draw weight.

So whats more important, setting the strings to exact spec or adjusting them so that ATA and BH are closer to spec? With my alien when I set the strings to spec the ATA is 31 1/4 so its a little...

Thanks I will give those a try

Just got a 2010 Alien X and was setting up the draw length. I cant seem to find a hex wrench to loosen the draw stop. I was wondering if anyone could tell me what size it is. Cant wait to get it set...