Search:

Sorry Hutch, couldn't tell you, as I said my nephew did all the top coat work on the bow, I don't think it would be anything less than top end kit.

It's just acrylic paint and well lacquered but done through a spray gun, not Aerosols :(

Picture does not do it justice, has some nice though subtle green/gold flake in it too,
Stripped with...

Was a little disappointed when my "black" bow I ordered was in-fact carbon effect
so took little tempting for a strip down and some new paint and matching strings
and stabilisers......

Well I like it!!!
http://img9.imageshack.us/img9/8413/cimg0725aq.jpg
New strings made by me, everything in spec, Peep aligned just nice no rotation,
and only three bits left in the box...

I just use the lead from an HB pencil on the back of the slide rod, the graphite content is high enough for effective slick lubrication, though there is the risk of it transfering onto clothing and...

A lot of target archers like a higher holding weight as it gives you something to "brace into" during windy conditions, trying achieve the same solely by pulling harder into the draw stop peg with a...

Yeah! basically as said above, move the draw stop peg to the +ve end of it's range, set your draw length with the module adjustment feature so that the cables and vertical part of the module are...

My 2011 Shadowcat with nitro cams has a little give too, no clicks or lateral play but I'm able to push the cam (in the direction of the bowstring) and can detect some motion,
bow is in bits now and...

Those black marks on the bottom fletchings look like an obvious indication that there is contact issues with the rest of some kind, perhaps rest isn't moving out of the way in time or possibly...

Just taken some pics:- Stripped riser would be a polishing finish nightmare should anyone wish to go that route, nothing anodised under the paint, very pitted and knocked about looking under the...

I would still turn the slide rod out but have it angled at 120° that way you are bringing the slide further down pulling the cables out of the way but nearer the arrow (optimising clearance but with...

A nightmare lies ahead for you, as I said mine is mid strip (using Nitromors Paint Remover) and the finish of the bare metal that lies beneath will need a heck of a lot of polishing to get to...

We seem to be following a similar path Neil, I'm on stripping my bow for a respray too, getting my talented nephew to do the spraying, in the mean time I'm currently doing the paint laborious...

You can should you wish, once the limbs are fully backed off get someone to apply force to the limbs and unhook cables/string but, as the several posts on split & snapped limbs are a bit too scary...

Page 12 of the Shadowcat/2011 Martin manual:-
"First, relax the bow properly in a
bowpress before attempting to make any
adjustments".

Even if you replaced the existing 50mm limb bolts and...

Nope can't be done, requires a bowpress.

Thanks, It was the slight "rock" that I was getting, in that you could push the cams up and down in the direction of the bowstring and get a detection of movement that I had the real issue with, but...

"Help! Is there a correct/definitive route for the cables on my 2011 Shadowcat Nitro cam 1.5 to follow?
On YouTube:-


http://www.youtube.com/watch?v=OZC19bxMRWw&feature=plcp&context=C31e5a7eU ...

Help! Is there a correct way/position for the cables on my 2011 Shadowcat to follow? On the YouTube video...

If you do a search for "rods" or "skyfish" not only will you find items to go fishing with, but also the phenomenon of unidentified flying objects.
I believe its a result of ccd sensor in digital...