Search:

I once had a similar situation...turned out the string was slowly failing, strands must have been slowly breaking and finally it snapped! The string length must have been streching where the strands...

+1 for "JoelC Archery"!!!

When can I place my first order...and do your bows come with a beer can holder?

I believe they are all the same. The Diablo is a great shooting bow!

If you are really looking for energy (110+ ft-lbs) for large animals, you may want to consider a different set-up. I helped my brother get ready for a cape buffalo hunt in Africa, we tried different...

I am assuming that you are talking about the width of the gap in the split limbs, it is 0.335" at the limb pocket and 0.375" just before it opens up for clearance at the cam.

Hope this helps!

It is usually 5 turns out from max weight. Just watch the barrel nuts that the limb bolts screw through, if you start seeing the end of the screw, turn it back in a half a turn and call it good.
...

You should be able to notice an upgrade in shooting your Hunter, espically if you have a longer draw length as it will not stack past 28" like the X-200's do. If you are looking to quiet the bow,...

The black looks 10x better as it shows off the contrasting red better...Great Job!!!

Bohnning Tape is awesome!!! Put a dab of Fletchtite on the leading and trailing edges of the feather and you should be good to go!!!

Good luck...and show us your crafted arrows!!!

2009

Tough to beat a LimbDriver Rest (unless your sponsered by someone else)!!!

Peace, I would be a little careful grinding on your grip, it would be much better if you could have someone mill it down as you will get a nice uniform, parallel surface. I have a Bridgeport mill...

Peace, the bottom grip hole might be designed to be a slot rather than a round hole, to allow the grip angle to be adjustable. If it had holes on the top and bottom, you would not be able to adjust...

I would recommend a lightweight bow to work on your form, it would be difficult starting out with a 50# recurve. I shoot a 72# compound, and a 40# @ 28" recurve. Think about your holding weight,...

What do you guy's do with all the old traded-in bows...sell them to Mathews R&D department?

It is a new riser built specificaly for this bow.

The bow shoots great, better than the Jaguar!

From the 1990's, I have the following Martin Catalogs:

- 1993
- 1996
- 1997
- 1998
- 1999

Is there something specific that you would like me to look up?

Yes, I did get the spec's from Joel.

I have been shooting it, and it really shoots nice! The valley seems steeper than my older Aliens with a solid back wall.

Definately a great bow, but there...

I am not fully on-board with the Saddleback grip yet. I love my Alien-X's and Alien-Z's and the way they feel. It is probably because I am so used to shooting that grip. With the Saddleback, it...

The bow draws smoother than my Alien-X's or Alien-Z's. It seems like it is the limbs that are contributing to the smoother draw, along with the bearings in the cams.

The bow is more compact as...

My other Rytera's have the straight grip.

I have a 2011 Martin Onza 3 and a 2012 Martin Pantera.

Here are the dimensions (width is measured looking from behind the bow, thickness is measured...

Here it is:

http://images.imagelinky.com/1360281023.JPG

Thanks for the great instructions! I will give it try this evening...hopefully I can get it to work!

Dean

I don't know how to post pictures. Someone who does, give me your e-mail address and I will send pictures to you if you post them.

Thanks!
Dean

I just got a 2013 Alien and I cannot read the sticker that has the String and Cable lengths on it.

Can someone please give me the spec lengths?

Thanks!
Dean