Search:

I shot the PSE Supra and the PSE Freak and really like the way they shoot. I plan on buying one of them I just can't decide between them. They are both 37-38 in ATA and the Supra seems really fast....

Take it for what it is worth, limb twist, cam lean, horizontal nock travel all affect arrow travel. My Alien Z, and Alien X shoot much better and are much easier to tune without it. I put Tilt...

Don't forget about string weight. Every 3 gr of string weight added will cost you 1 fps. For every 3 gr of additional arrow weight you will lose 1 fps. For every inch under 30" in draw length you...

I have a 2009 Alien X and it is the sweetest shooting bow that I have shot quiet, dead end the hand, light, and quick. I can't imagine how much better the 2013 Alien is? I have compared the 2009...

Pizza,

The rod conversion bracket is a CG4.

The nock travel is directly inline with the centershot. The rest, arrow, and the sight pins line up. With my Alien Z I could not get rid of a left tear until I removed the CCS. I could also feel...

Have you tried to backout the limb bolts, press the bow, and remove the string and cables? Just see if everything is fine when there is not limb twist from the cable guard. If the cam is rubbing...

It is a bracket and two screws. The bracket slides in and the two screws just pin the guide rod to the bracket. I think that it was $12.

I finally got all the hardware to change the CCS out. I bought a conversion kit from Martin and installed a tilt tamer select on it. Centershot set very close to the initial eyeballing of...

I know that a lot has been said about the CCS and the love-hate relationship that some of us have with them. I am waiting for a conversion kit from Martin to rid myself of the CCS. I would like to...

I have a QAD and a Ripcord. I like the idea of the limbdriver and not having to serve into the down cable. Also should make it easier to tune when twisting cables and changing draw modules etc...I...

If they would have put a regular cable slide on the Nemesis 35, I would be all over it. The way they designed the bridged riser -- I am not sure that I can convert it to a cable slide. As it is now...

http://www.archerytalk.com/vb/showthread.php?t=626601&highlight=optimizing+cat+cams

Give this one a try.

Jermin,

What kind of release are you using? If you change your release you may be able to handle a longer draw length but keep a comfortable anchor point.

If you want to learn a ton about the Martin Nitro/Hybrix/Cat Cams you should read up on the following thread from Archery talk. These cams are all virtually the same and you can really speed your...

You can checkout Ikesoutdoors on Youtube. He gives a review of Fusion and Duravanes I think. I only have experience with the 2 inch blazers which I have really good luck with.

I just got my Alien Z back from Martin and am trying to acquire some accessories to set it up since I am now using the QAD rest on my Alien X. I put an HHA single pin slider on it with a 4 inch...

I just got my Alien Z back from Martin and am trying to acquire some accessories to set it up since I am now using the QAD rest on my Alien X. I put an HHA single pin slider on it with a 4 inch...

Could he short string the bow or twist the bowstring and untwist the control cables to get at least 1/2" to 3/4"?

Check out the kmarcheryhut.com they have some really good deals right now.

I don't have a Nemesis, but all that I do to set the centershot is to put nock an arrow and set it on the rest. Then I just eyeball the string coming off of the cams with the cams inline with each...

Hey Drop,

Here's one.
http://www.sportsmansguide.com/net/cb/f-1-chrony.aspx?a=122076

I would go to craigslist and find the cheapest Martin bow that you can find, then trade it in for a close out 2012 directly from Martin Archery. They will give you $150 for that yard sale bow that...

If you want the string stopper to just touch the string at brace and after the bow is fired it is pushing the stopper forward you will need to loosen the two set screws on the riser that hold the rod...

Josh,

What kind of issue are you having with the stock string stopper? My Rytera Aliens have the same type of string stopper and they really work well. My Onza 3 has the carbon STS which I don't...