Search:

Type: Posts; User: DeanRM

Page 1 of 4 1 2 3 4

Search: Search took 0.09 seconds.

  1. Thread: Martin Silencer

    by DeanRM
    Replies
    6
    Views
    168

    What don't you like about your Nitro cams? Are...

    What don't you like about your Nitro cams? Are the string/cables to the proper length, and are the cams timed? If the bow is not set up quite right, it can make a big difference in how it feels!
  2. Replies
    27
    Views
    1,109

    FYI - Your Brace Height may increase a little as...

    FYI - Your Brace Height may increase a little as you reduce the draw weight on a 70# bow to 60#. Usually not too much, maybe a 1/4", depending upon the bow.
  3. Replies
    13
    Views
    480

    Hope this helps!

    Hope this helps!
  4. Replies
    13
    Views
    480

    You might want to try shims between the bearing...

    You might want to try shims between the bearing flanges and limbs until the e-clips are tight aginist the limbs. You could try making some temporary ones with old credit card or business cards and...
  5. Replies
    13
    Views
    480

    Are the bearing flanges tight up against the...

    Are the bearing flanges tight up against the inside of the limbs, and are the e-clips tight against the limbs?

    Try taking your mods off and checking for the noise, might be able to narrow it down?
  6. Replies
    6
    Views
    238

    Those are the same numbers that are printed on my...

    Those are the same numbers that are printed on my 2013 Nemesis 35. I have not had the string/cables off to check them yet.

    Not sure if the spec's changed for 2014 with the change to the cable rod...
  7. Thread: at wits end

    by DeanRM
    Replies
    19
    Views
    651

    LimbDriver Pro-V, Trophy Ridge Smackdown, G5...

    LimbDriver Pro-V, Trophy Ridge Smackdown, G5 C-Max, all driven off the limb rather than relying on a spring to pull the rest out of the way.
  8. Thread: Fury XT issues

    by DeanRM
    Replies
    17
    Views
    630

    Could you try swapping the top and bottom limbs...

    Could you try swapping the top and bottom limbs to see if that would help?
  9. Replies
    10
    Views
    515

    Could you get David Barnesdale to make your Dad a...

    Could you get David Barnesdale to make your Dad a set?
  10. Replies
    22
    Views
    1,935

    I hunt out of a tree stand with my 66"...

    I hunt out of a tree stand with my 66" longbow...has worked for me for many years!
  11. Replies
    1
    Views
    117

    Move your draw stop peg a little to increase your...

    Move your draw stop peg a little to increase your drawlength, and if your drawlength gets too long, rotate your mod to decrease your draw length 1/2".
  12. Replies
    17
    Views
    1,276

    If you have a catalog, or go on-line and look at...

    If you have a catalog, or go on-line and look at page 21, it lists all the bows and draw lengths with the available cams.

    Hope your business does great!!!
  13. Replies
    17
    Views
    1,276

    The specific draw lengths also depend on what ATA...

    The specific draw lengths also depend on what ATA bow you are referring to, so you might want to look in the Martin catalog for the specific bow/cam combination.
  14. I would go with the nemesis 35 because of its ata...

    I would go with the nemesis 35 because of its ata and weight.
  15. Replies
    5
    Views
    363

    I was always a LimbDriver guy, never seemed a...

    I was always a LimbDriver guy, never seemed a reason for any other rest. Ended up with a Smackdown, and I like them just as well. Might actually be a little tougher rest, and I kind of like hooking...
  16. Replies
    9
    Views
    795

    I think using a low poundage bow is one of the...

    I think using a low poundage bow is one of the best ways to get your form down, then move up in weight and try to keep the same form. If you cannot hold your bow at full draw for 3-5 seconds without...
  17. Replies
    39
    Views
    2,852

    Sticky: Sounds like fun! I need to wait until the 4' of...

    Sounds like fun! I need to wait until the 4' of snow melt here in MN before I can get out to 100yds.
  18. Replies
    24
    Views
    1,239

    Congratulations! Good job on suggestion!

    Congratulations! Good job on suggestion!
  19. Replies
    3
    Views
    314

    My brother is going to Africa to hunt Cape...

    My brother is going to Africa to hunt Cape buffalo. He was down there two years ago with a 87# Mathews Monster Safari w/1000gr arrow. Shot a buffalo, tracked it for two days, but never found it. ...
  20. Replies
    20
    Views
    1,077

    One thing that I will add to your experience that...

    One thing that I will add to your experience that I have noticed, using a draw board on a two-cam bow, such as Nitrous cams, can be a little miss-leading as the draw board does not apply the same...
  21. Great info! So from your data, I would guess...

    Great info!

    So from your data, I would guess that 95 = 6L and 105 = 5L, adding 5# per number increase on Martin's number system, and adding 5# per 5 numbers decrease on Barnesdales number...
  22. Limb Deflection Numbers - Martin vs. Barnesdale

    Is there a consciences on 13" Martin vs. Barnesdale limb deflection number correlation?

    This is what I came up with, not sure if it's right:

    1M = 135
    3M = 115
    5M = 95

    Let me know what you...
  23. Replies
    3
    Views
    314

    WTB - 14" 7H, 8L, 8M or 8H Limbs

    I have a SlayR w/Nitrous-C cams and would like to get around 80#'s out of it. I currently have 14" 5M Limbs and it max's out at 68#. Does anyone have 14" 7H, 8L, 8M or 8H limbs that they would like...
  24. Replies
    10
    Views
    791

    I don't think those limbs would fit as they are...

    I don't think those limbs would fit as they are for the older style of limb pockets, not the Roto-Cup pockets that are on your bow.
  25. Replies
    17
    Views
    2,116

    I think it is an awesome bow!!! I bet you will...

    I think it is an awesome bow!!! I bet you will love shooting it!!!
Results 1 to 25 of 82
Page 1 of 4 1 2 3 4