Info needed on Shadowcat string length

[CarlosII]

i had to swap out my shadowcat limbs and sent my old limbs with the string and cable length info on them without writing the info down.

its a 2010 model with the 41.5 inch ata.

anybody know what they are supposed to be?

[Simple Life]

http://www.martinarchery.com/2011/2010_older_specs.php

[CarlosII]

thanks. appreciated.

[hotrod26]

If you go by the chart and are trying to get down to 27" DL then the chart is incorrect. You have to add about 1/8" to the cables to get it close to the correct DL. My Shadowcat as it came from the factory was about 3/4" long on the DL. With the mods in the 27" hole the DL was 27 3/4". Had to take 3 twists out of the cables so I could get it to 27.5" DL and that is with the mods set at 27".

[hotrod26]

I guess no one wants to reply to my post. I guess it is because anyone with a Shadowcat knows that I am correct.

[CarlosII]

the chart lists the ATA on the shadowcat as 39 inches. my sc measures 41.25 inches. i assume that chart won't work with my bow, right?

(just got off the phone with Joel. he cleared it up for me.)

[hotrod26]

The chart has not been corrected. Initial the Shadowcat was to be a 39" ata bow. A print mistake caused corrections that lead to the 2010 deminisions of 41 1/2" ata. Afterwards, NOV RUT, speced out the Shadowcat and adjusted strings lengths gave the 41 1/4" ata.

So what are the correct string and cable length's according to NOV RUT?

[justin]

=) nov rut is an at guy right?

[hotrod26]

Bow string - 59 3/4" / cables - 46"

These are the current lengths on the website. So where is the change? The cable length is still wrong if you want to get the DL down to 27".

[hotrod26]

Do you have any idea what the cable and string length's should be if one was to build a set of cables and string to get the true DL?