Results 1 to 4 of 4

Thread: Scepter II Elite Lilmbs Nitrous A Cam

  1. #1
    monradon
    Guest

    Default Scepter II Elite Lilmbs Nitrous A Cam

    Scepter II Elite Limbs with Nitrous A Cams what would be the string and cable lengths.

  2. #2
    FS560
    Guest

    Default

    One of the problems is that Martin never made this bow with Nitrous cams, but they did make the S3 with nitrous cams.

    The ATA on the S2 elite and the S3 elite is the same, so you could start with the cable and string length for the 04 S3 elite with nitrous. It may not be exact to fit you but remember that the nitrous only adjusts to the nearest half inch anyway and string or cable adjustment is necessary to get your fit exact.

    In any event I would recommend the brace height be about 8 inches. Start with the limbs you have before buying new limbs, you can adjust from there.

  3. #3
    Martin Tech PUG's Avatar
    Join Date
    Aug 2005
    Posts
    8
    Post Thanks / Like

    Default specs...

    55 1/2" shoot and 44 3/4" cables....

    Same as the Scepter III...hope this helps!

    PUG

  4. #4
    Senior Member
    Join Date
    Oct 2005
    Location
    Azle, Texas
    Posts
    112
    Post Thanks / Like

    Default

    I used the string and cable lenghts PUG said. My ATA is 43 1/2". Brace height is 8 3/8". It shoots great. When you look up my lousy scores, IT'S NOT THE BOWS FAULT.

    Robert
    May All Of Your Arrows Find The Bulls Eye-MSMFSL
    NRA Life Member
    NFAA Member
    Martin Proud
    Scepter IV Elite w/Furious X Cams

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •