Okay Guys what is the one best bow tuning tip you can give?
Last edited by Destroyer; 10-01-2011 at 10:52 PM.
IMO, paper tuning is over rated. Sight in w FP at 20yds. Shoot BH's @ 20yds. If needed,adjust accordingly. Do the same at 30yds. Won't take long to get FP/BH groups together.
'07 HCA Iron Mace
'08 Martin Bengal
'11 Martin Exile
Bow String Depot custom threads
This is supposed to be fun, so don't let it get to you. The majority of this sport is mental, so if you get frusterated, take a break.
Sometimes the problem is just you're having a bad day, and if you keep going it will just get worse. Take some time to reflect, mentally go over your form and follow through, check your equipment and maybe do some forum research.
Or, put down the bow and pick up a fishing pole!
In God and guns we trust;
- One nation, under God, indivisible, with liberty and justice for all.
- A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.
2011 Onza 3: 70#, 28.25 draw (AMO), 384 gr arrow, 288 fps
2005 Saber: 70#, same arrow, 250 fps
Tuning is so dependent on consistent, repeatable form. When all else fails, spend the money on a good qualified coach. You can't properly tune if your form sucks.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
PSAA Life member, UBP Life member
PADI AOW Diver
agree with bfisher, also make sure bow is properly set up for you i.e. draw length and weight etc, if you get a hand me down or a used or new make sure its set up for you.
2003 Martin Prowler SE
2011 Hoyt Rampage XT
Trophy Ridge Sights
Crimson Talon XT broadheads
My best tip would be to take it slow. Alot of people get in a hurry to do things, and overcompensate. Make small adjustments at a time, shoot several arrows to check what you've done. It's all a matter of taking the time to get everything just right for you. Then you can go shoot all you want!
2006 Rytera Bullet X 60#---2008 Moab 70#
2008/12 Firecat 60#--- 2010 Warthog 70#
2009 Warthog 70#
2010 Strother SR-71 65# & 2012 Strother Rush 65#
2012 Strother SX Rush 60# & 2011 Strother Infinity 70#
I hunt, therefore I eat. lol
Last edited by Destroyer; 10-01-2011 at 10:53 PM.
One thing you should know is how to properly measure your string and cable when it is time to replace it.
Many string builders build off of spec sheets and some times they are not right. If you know how to measure your string set properly you will get the right string the first time.
1. Strings are measured twisted.
2. Strings are measured under a 100lbs of tension.
3. Cables are measured the same way.
4. Strings are measured inside loop to inside loop.
5. Strings are measured on 1/4" posts.
6. Strings are measured from the bottom loop to the start of the next serving.
7. Then they are measured from the bottom loop the end of the next serving.
(do this till you are finished all the servings)
example: Rytera Nemesis
If you measure everything correctly the string maker can build to spec.
Now this goes both ways if a string maker sends you a string set. You can measure it and know if it is good.