Results 1 to 3 of 3

Thread: Changing Draw Module on Bengal?

  1. #1
    ncbowhunter
    Guest

    Default Changing Draw Module on Bengal?

    Do you have to have a press to change the draw length module on a Bengal? Can you give tips, etc.
    Thanks

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,562
    Post Thanks / Like

    Default

    You may or may not. It depends on how the cam is situated. I just looked at mine and both set-screws are accessible so no need for a bow press. If however, the head of the screw is hiding behind the limb all you need to do is squeeze the cable and riser together which rotates the cam a little. Then you can get at the screw. Piece of cake. So normally not is the answer.

  3. #3
    Myk
    Guest

    Default

    Mine requires a cable squeeze for one of the screws.

    Do not let up on the cable while you have the screw backed out or the allen wrench in the screw.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •