Results 1 to 2 of 2

Thread: Arrows

  1. #1
    Bones
    Guest

    Default Arrows

    Would like to sit my Martin Quest 27.d draw length with 58lb draw weight. I currently shoot Beaman ICS hunter 400s at 28.5 inches with 100 grain tip. Will these work for this bow if not some suggestions please.

    Bones

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,642
    Post Thanks / Like

    Default

    They might be a little over spined, but should work OK. I shoot 27" draw also and can get good flight out of a 500 spine up to about 63#, but I'm very sensitive to my tuning. I've also shot 400's down to about 56# with good results.

    All told I would go ahead and shoot them. With carbon arrows it's usually better to be overspined than under; especially when you are going to shoot broadheads.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •