Results 1 to 4 of 4

Thread: First post. Maverick 3D

  1. #1
    BTL
    Guest

    Question First post. Maverick 3D

    I have a Maverick Pro Series 3-D with the Micro Tune cable system, 55-70lb Tracer Cams and 28" drawlength. Bow #36167.
    I purchased this new on 7 Nov 94. I just checked the bow and the string has seperated. My owners manual has the information page filled in and it shows the string length to be 62"
    I laid out the string on the floor and it measures about 72"
    The string attaches directly to the cams.
    The manual states to use at least 18 strand low stretch Spectra or Vectran type material.
    My question is is the string length (62") that I wrote in my manual correct for this bow?
    I do not know exactly how strings are measured, but as I stated above the broken string appears to be about 72" long.
    Thank you for your assistance.
    BTL
    Last edited by BTL; 04-30-2007 at 11:25 AM.

  2. #2
    Myk
    Guest

    Default

    If you don't get an answer you might have to call Martin.

    I have a hard time believing your string has stretched 10".

    It's not written on a limb sticker?

  3. #3
    BTL
    Guest

    Default

    Myk
    The limb sticker came off years ago. I thought I pulled it off and stuck it inside the owners manual after it started peeling off, but it is not there.
    BTL

  4. #4
    joelc
    Guest

    Default

    here is a link to the 62" string you will need...

    http://www.shopatron.com/product/pro...0.5908.0.0.0.0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •