Results 1 to 3 of 3

Thread: Cam Let Off Question

  1. #1
    kvankoe
    Guest

    Default Cam Let Off Question

    I have a Martin Razor X with SE limbs. It is outfitted with nitrous cams. I have a 32-33 inch draw. My question is can I have these cams modified to allow 80% let off? (current set up is 65%) Or can I put on other cams to allow 80% and still get my draw length? If so is this something a sports shop can do or should it go back to Martin? My sons have the new Bengal with 80% M-Pro and I love that 80%!! Thanks for the help.

  2. #2
    smarpo
    Guest

    Default

    The draw modules on the cams determine the let off. If your shop doesn't have them you can order them from martin.

  3. #3
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Location
    Middletown, Pa, USA
    Posts
    11,585
    Post Thanks / Like

    Default

    The Nitrous cams only can be had with two module configurations. Standard is 75% and optional is 65%. Letoff can vary some with draw length changes. I usually get about 71% letoff at 27" draw. You'll probably get a little more, closer to 75%. 80% was never an option with Nitrous cams.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •