Just checked the technical charts on Martin's website---2002. Here's the deal. For a 28" draw the string should be on the #2 post with an 6x module installed. To make it 28 1/2" you'd move the string to the #1 post. You can also do it another way. If the module is an 8x then move the string to the number 3 post.
Either way will give you the same draw length. A physical measurement is recommended once you get done as it is also dependent on string and cable lengths.
The #2 post is for even measurements such as 28", 29" and so forth with their respective modules installed. The #1 post is for increasing the draw by 1/2" and the #3 post for making it shorter. The string should go directly to the post you desire, but in some cases you can wrap it over the other posts to customize the draw, like 1/4" less. Not recommended, but I've done it with no ill effects.
Last edited by bfisher; 08-24-2011 at 08:52 AM.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
PSAA Life member, UBP Life member
PADI AOW Diver