Results 1 to 9 of 9

Thread: Where did the thread go?

  1. #1
    Senior Member
    Join Date
    Jan 2011
    Location
    Michigan
    Posts
    182
    Post Thanks / Like

    Default Where did the thread go?

    I could have sworn there was a member on here that took a piece of metal and made a bent in it the same angle as the TRG and put a teflon slide on the angle part of it so it acts just like the TRG but I can not find the thread for the life of me. Does anyone know who posted it or where the tread went to? I would really like to re-read that post and look into it a little further in depth. Seems like a great idea that can be used in the future for any bow company using the rod and slide. Thanks guys.

  2. #2
    Senior Member
    Join Date
    Jan 2011
    Location
    Michigan
    Posts
    182
    Post Thanks / Like

  3. #3
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,934
    Post Thanks / Like

    Default

    Nice hunting Kyle, good find! And thanks for bringing Rocky's post back up for us, seems a better method. I noticed that several folks said they were going to give it a try, so if ya'll did make Rocky's guide, how did it work out for your bow?
    Last edited by elkslayer4x5; 10-13-2011 at 04:16 AM.
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  4. #4
    Senior Member HawgEnvy's Avatar
    Join Date
    Feb 2011
    Location
    Ionia(I-OWN-YA)Mi a prison town,go figure
    Posts
    1,463
    Post Thanks / Like

    Default

    im curious to know also. i didn't get that far. but i do have the aluminum rod that i'll be using. does that count? lol
    '14 ChillR 28.5"/74# Extreme Recon sight,Schaffer Opposition rest,LS modular stab, Beman ICS Hunter 340

  5. #5
    Senior Member elkslayer4x5's Avatar
    Join Date
    Mar 2008
    Location
    Lane County, Oregon
    Posts
    2,934
    Post Thanks / Like

    Default

    Sure it counts, intent is counted in golf!
    http://eastoutfitter.tripod.com/index.html
    http://www.cascadianbowmen.org/
    Martin 06 Slayer, Nitrous C, shoot thru, 63lb, Quiktune 3000, HAA OL 5519, Beman ICS Hunter
    Martin 06 Slayer, Nitrous C, Shoot thru, 55lb, Quiktune 3000, HHA OL 5519 2X, Easton A/C/C
    Ben Pearson 1968 'Cougar' 62" 45#s @ 28" recurve, parallel shaft POC, Zwickey 'Eskimo' 2 blade

  6. #6
    Senior Member HawgEnvy's Avatar
    Join Date
    Feb 2011
    Location
    Ionia(I-OWN-YA)Mi a prison town,go figure
    Posts
    1,463
    Post Thanks / Like

    Default

    wouldn't know. I've never golfed. I thought OLD and grey was a requirement of golf. Lol
    '14 ChillR 28.5"/74# Extreme Recon sight,Schaffer Opposition rest,LS modular stab, Beman ICS Hunter 340

  7. #7
    Member
    Join Date
    Oct 2011
    Location
    Southwest, AR
    Posts
    51
    Post Thanks / Like

    Default

    Wow! That's awesome! I've been planning on doing something almost exactly like that! Anybody ever notice that's the way of things...whenever you have a great idea, it seems someone else across the country will have the same idea? Ever thought up a solution to a problem, and thought, "I should patent that...make a million dollars"....then in a month you see YOUR great idea at Walmart, or in one of those "as seen on TV commercials"?

    What inspired me initially was the cam lean on my single-cam Orion. It was so bad it was causing the cables to rub while being pulled over the cable grove as the cam rotated. The cable guide rod was set WAY out, so I moved it in and nearly eliminated the cam lean...but then I had vane clearance problems. It seemed there just wasn't any middle ground! So I started investgating...reading the forums to see if anybody else had the same problem, and sure enough they did, but nobody had come up with an adequate solution. At the time I didn't know about Martin's TRG.
    It was in my "investigating" that I noticed these string stoppers on the new bows...if anyone has read my other posts, you know I've been out of it for awhile. Anyway, I want to take all the do-dads off my bowstring, and a string stopper would be a great way to quiet it down. But for one, I don't have a rear mounting hole in my riser. I also don't like the front mount ones that swing around the riser. And I definitely didn't want to pay in the neighborhood of $50 for one! So I got to thinking how I could make something like that, and thought I could just put a stopper on the end of the cable guide rod, and swing it around to line it up...but then the problem became how to maintain cable clearance.

    I got to looking around on the Interweb, trying to find pictures of how these problems were addressed on the new bows, and come up with parts to cobble something together. That's when I discovered the "Tilt Tamer".

    http://tilttamer.com/default.asp

    If you check the link, you can see it addresses the cable lean problem in the same way as Martin's TRG. But looking at it I asked myself why should I add an attachment to the guide rod, when I can just bend the rod, and keep the cable slide? That seemed like it would work...but what about the string stopper?

    After a whole lot of looking, I finally found this:

    http://www.sausa.com/product.php?product_pk1=26

    So now I think I'm set! I can fix the cam lean, and silence my string! Plan on using my original guide rod, probably cut down just a tad. Ordered the string stopper, which will attach to the guide rod. And I ordered a couple different cable slides to see what works best. I have the factory slide, which mounts the cables on the inside. Ordered something similar from Bohning, but it's 100% teflon. And I also ordered a roller slide from Browning...I've read some shooters have a problem with the cables cutting into the soft teflon, and wearing it out real fast, but the roller slide has a hardened pin in it. That part came in today!

    Let me say thank you to Rocky for the original post, and to kyle for bringing it back up! Now I know what I was planning will work!

    Sledge

  8. #8
    Junior Member
    Join Date
    May 2011
    Posts
    7
    Post Thanks / Like

    Default

    K&K archery actually use something like this, I'm curious as to what size their rods are ...
    That said, I'm pretty happy with my offset cable rod, adjusted for minimal clearance and it seems to flex a little at full draw anyway.

  9. #9
    Super Moderator Arrow Splitter's Avatar
    Join Date
    Oct 2010
    Location
    Gilmanton, NH, United States
    Posts
    3,811
    Post Thanks / Like

    Default

    Quote Originally Posted by HawgEnvy View Post
    wouldn't know. I've never golfed. I thought OLD and grey was a requirement of golf. Lol
    I think you already meet the OLD requirement, because aren't you going to turn 73 in 8 days?
    Last edited by Arrow Splitter; 10-14-2011 at 05:57 AM.
    2011 Martin Firecat 400/NAP Apache Dropaway/Truglo Xtreme Sight/Custom 8" Stabilizer/Victory V6 Arrows
    2007 Martin Jaguar /Trophy Taker Dropaway/Extreme Sight/Custom 21" Stabilizer/Victory V6 Arrows
    Bow String Depot, Custom String Builders email us @ bowstringdepot@gmail.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •