martin ccs on my bonehunter?

[FiddlersGreen]

i see my bow came with either the cable rod, or the ccs....mine came with the cable rod. if i wanted to put the ccs on, am i gaining anything?

[justin]

nope not really gaining anything. your cable rod guide works great!! if you did get a ccs you would also need longer cable, or back your bow down about two turns to maintain draw weight. a good sts type system, and a good stabilizer will help more than the ccs though

[MLN1963]

You can't put a CCS on your bow, the riser isn't cut for it.

[justin]

Drill and tap some holes. isnt the rod in a bracket, that has thesame bolt pattern as the ccs?

[MLN1963]

Not possible. It is a C channel cut in the riser.



See right below the 1 1/2" mark under the tape?

[gravedigger]

if your bow did take the ccs i would say do it.i did not have to get longer cables when i put the ccs on my bengal and i did not have to back out my limb bolts either.i did gain 3 lbs of DW but that is fine it has had no ill effect on my bow.my draw felt so much more smooth after i put my ccs on.i was juse a bit more ez to draw.

[gravedigger]

Drill and tap some holes. isnt the rod in a bracket, that has thesame bolt pattern as the ccs?

do not do this.

[FiddlersGreen]

You can't put a CCS on your bow, the riser isn't cut for it.

mine has a square channel cut into it...just like the ccs

[FiddlersGreen]

nope not really gaining anything. your cable rod guide works great!! if you did get a ccs you would also need longer cable, or back your bow down about two turns to maintain draw weight. a good sts type system, and a good stabilizer will help more than the ccs though

mine came with the martin sts, just no ccs. and im using a s-coil from sims.

[MLN1963]

mine has a square channel cut into it...just like the ccs

What year is your bow? Is it the same as the Martin Exile? They changed in 2011 as far as I know. Can you post pictures?