Results 1 to 2 of 2

Thread: Draw length mod screw will not tighten

  1. #1

    Default Draw length mod screw will not tighten

    Hey all,

    I have an '06 Saber, Dyna Cam, and noticed the other day that the draw length module (plastic kind) was loose. Well, I went to tighten up the mod screws and they just kept turning and turning without getting tight. The threads aren't damaged. I can't tell if the holes are stripped out.

    The module has never been messed with except when they set the bow up at the pro shop a year ago. Would replacing the module fix this problem or is it something more serious like the cam holes were not threaded properly?

  2. #2
    Super Moderator bfisher's Avatar
    Join Date
    Nov 2005
    Middletown, Pa, USA
    Post Thanks / Like


    Yeh, you need to get back to the shop and get another module. They are just plastic and it sound like the threads are stripped on the one you have. You can either check with the dealer or deal with Martin customer service if you'd like an aluminum one. Pretty sure they can be had.

    Oh, don't shoot the bow till this issue is solved.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts