Our New Martin Exile is Super Loud! Sounds like a tuning fork! Help
I need help! I'm a pretty seasoned archer and hunter. I do my own tuning and have a couple bow presses an have pretty good idea of how compounds work but I gotta say I'm really bummed with my son's new Martin Exile RH 70lb bow. After I set it up, I shot about 2 dozen arrows thru it and it's shooting super loud. Almost like a tuning fork sound. I've owned over dozen compunds over the years including a 2009 70lb Cheetah(one of my all time favs) and can really hear the difference. My current line up includes a Z7, a GT500 and a Vendetta XS. I know these are mid to high end bows and have more features that help with silencing the bow but the sound that this bow makes is not good for the type of deer we hunt here on Maui. Axis Deer are quick and have been known to jump shots by dip down before jumping. They are super sketchy and you gotta be super quite to spot and stalk these. I bought him this bow because of my previous experience with my Cheetah(had a string stop on it) and don't remmber it have any sound like this. Here are the specs for the bow-
Martin Exile 55-70lbs, RH, Acu-Trak Cam and the TRG. No String stop.
I just set it up with a first gen Ripcord drop away, John Cooper Dead Nuts 2 sight, an Apex Stabilizer and wrist sling.
Checked the ATA-ok, the tiller settings-ok and checked center shot-ok and leveled out the arrow with levels - 0 degrees(flat).
Set up the draw with the F-4 Module which I think is the right mod for a 27.5 draw length. (Please let me know if that's wrong) Adjusted the draws stop.
I shot four different arrows thru it - a Carbon Express Terminator 60-75 full length, a Gold Tip Hunter XT 5575 28.5", ICS Hunter 400 28.5" and Cabela's Stalker Extremes 65-80 28.5". The sound was the same with each arrow.
I'm using a d-loop and a Tru Fire Edge 4 finger release.
The one thing I didn't realize on these New Martin's is that they don't have a hole for a traditional string stop and they are using the TRG on this model(the 2012 Exile and Exile Pro have a standard carbon rod with teflon slide and no TRG and Fury Cams, I wonder if they were having problems with the TRG?).
Would the optional CCS be better or adding the the optional string stop that mounts to the TRG help?
Or adding a front mounted SST style string stop? Kinda think that wouldn't be good due to the new quick-lock stablizer mount(lining up problems).
I would like some feedback from anyone who has had the same problem and was able to fix it. Thanks guys!
welcome to the forum.martin is no longer useing the TRG and SOS,so give CS a call and they will send you a standard rod/slide.the CCS is not a option for the exile because it is not slotted for it,2010 was the last year martin bows took the CCS.for sure you should get a forward mount STS,toss some cat whiskers on it and mayby a heavyer arrow aswell.
check cam timeing because if it is off it too can make the bow a bit louder.a good ball of cat whiskers,cam timed and a forward mount sts should help a lot.my good buddy has a exile and it is perty darn quiet.could also be the E-clips buzzing and some string wax applied to them should help.make sure everything is good and tight,mod screws ect.
keep in mind you dont need a press to work on a martin bow,backing out the limb bolts will do the trick to give ya slack in the string.
the F-4 mod sounds about right for his DL.
and happy hunting
Thanks grave digger, I appreciate the quick reply. I truly believe this bow, under normal circumstances is a quite bow. I just think something is just off. I'll call CS tomorrow. In the mean time I'll throw the whiskers on and rewax strings and the e-clips too. I'll check all screws too. I'm also going to try my G5 sight, which has a vibration dampener built-in, to rule out the Cooper as a culprit. Not to mention the rest too, I'm going try a Whisker Biscuit.
Do you have a link to a post regarding can timing for the Acu-Trak cam? Also what front mount string stop would you recommend? Thanks again.
as far as front mount string stops go...i really dont know.i have never used them or looked into them.my bengal is a 2010 so i never thought about reading up on them f-mount stops.but i im sure some of the others on here can recomend something for you to look at.now for the acu trac cam timeing...i started a thread some time ago on this and had some good pics posted on it.tell ya what,i know my cam is timed for the most part and i will take a pic and post it up for ya.
Originally Posted by joecc3
my buddy does not have a string stop on his bow.he only has whiskers.
another thought would be to try a stab on it.i hear they help but then again i have never ever used one so i dont really have any first hand knowledge on that.
but i can tell you your boys bows can be noise free.
Another way to find noises, is to hold onto the bow with one hand and with the other palm, strike the limb with the heel of the palm. Start at the top and work to the bottom. It puts just enough vibration into the bow that you can isolate where the noise is coming from. I did this when I first got my bow and found a bad stabilizer, and later after shooting a while, my sight started making noise. This method worked both times.
my 2011 onza 3 came with the TRG, it was a lil loud for my liking, once i took that off and went with the standard slide, it was MUCH quieter
limbsaver makes a great front mounted string stop, i have one on my exile, go to my profile and look at some of my uploaded pics if you want an idea of what it will look like. its kind of trick to put on so it doesnt rub your cable but it can be done.
Originally Posted by gravedigger
I have one mounted on my Cheetah, works like a dream. If you run the rod on the left side of the bow for a right handed shooter, no clearance problems at all. I can get some pictures of it if it will help anyone.
Tags for this Thread