mabe your going to need to make a jig hold that blade at a 10* angle and then just flip it over to do other side... as per tempering yea not going to need that prety sure your ok there..
Senior Member
mabe your going to need to make a jig hold that blade at a 10* angle and then just flip it over to do other side... as per tempering yea not going to need that prety sure your ok there..
It's all fun an games till you put that big boy on the ground.. now its time to get to work
Martin cougarIII elite nitros B x system & HHA
Darton Fury recurve
http://www.cascadianbowmen.com/
Senior Member
if you really want to temper it then heat it up really hot and drop it in a bucket of old motor oil,not recomended but if you do watch out for the flame
Senior Member
Here are the pictures of my last knives. The quality of the photos isn't very good, but i had no time to take better ones.
2008 Martin MOAB - 45-60#, set at about 51-53# / 55#" Perfect Line" compound/ 55# Mongol horsebow/ 45# "Perfect Line" takedown recurve/ 45# Bearpaw Grizzly hunter recurve/ 55# Samick Longbow Cheetah ... and several homemade bows
Junior Member
late entry
Though I see this thread has been stagnant for a few months, I have made knives for over 17 years and will be glad to answer any questions.
Posting Permissions
Reply With Quote