I don't think you're going to find the 14" limbs compatable with the Cat2 cams. If you take notice there are sexbolts (rivets) through the ends of the limb forks of the limb forks for those bows that use the Cat/Nytro cams. There is a reason for this. These cams create a lot more energy due to a harsher draw so the limb tips must be reinforced. If the 14" limbs don't have this reinforcing then there is a real possiblity that the limb tips would split or delaminate where the axles are installed.
You should be able to use the Nitrous X cams as this was a standard setup beginning in 2004. The 14" limbs will give a higher brace height, longer a2a, and a little less speed, but are still a good cam on this bow.
If You're Not Living on the Edge You're Taking Up Too Much Space
Martin/Rytera Staff Shooter
PSAA Life member, UBP Life member
PADI AOW Diver