Today i finally decided to fix my idler wheel cam lean. i unscrewed the limbs probably eight full turns and there was still too much pressure on the string to remove one of the strands of the y cable. I didnt feel comfortable unscrewing it anymore so i found if i twisted the cam i could relieve enough pressure to remove the cable. Even though i didnt feel comfortable unscrewing it anymore, i still had plenty of bolt left. I am getting a string in from hutch tuesday so i will have to take everything off of the bow again. My question is, if i continue to unscrew the limb bolts will they eventually release all of the string pressure without busting apart? Thanks.